XPOWER Air Scrubbers: X-2480A, X-2580, X-3400A & X-3580 Compared

Current normalized XPOWER air scrubbers

The most striking commonality is electrical load: all four publish 2.8A at maximum or rated operation. That means the decision is driven more by airflow class, carbon filtration, control style, size and outlet configuration than by a large amp difference.

X-2480A vs X-2580: same compact chassis, different filtration

X-2480A and X-2580 both publish 550 CFM, five speeds, 2.8A, 23.6 lb and dimensions of 16.6 × 10.4 × 18.9 inches. That makes them a particularly clean comparison because the physical and airflow platforms are so similar.

The key difference is filtration. X-2480A uses NFS13, PF13 and HEPA35-33 in a three-stage arrangement. X-2580 adds NFR9 and CF15 activated carbon, creating a four-stage configuration intended to add odor and gaseous-contaminant adsorption to the HEPA particle-filtration path.

X-2480A is the simpler compact fleet option

The current X-2480A page publishes built-in power outlets for daisy chaining, a filter-change indicator, HEPA filtration and a compact stackable ABS housing. Its 550 CFM / 2.8A / 23.6 lb combination is attractive when a fleet values low weight, compact transport and onboard power outlets more than included carbon media.

Because its carbon stage is not part of the normalized configuration, the Finder does not give it credit for carbon filtration merely because another XPOWER model supports it.

X-2580 adds carbon without increasing the amp draw

X-2580 retains the same 550 CFM and 2.8A planning load while adding CF15 activated carbon ahead of the HEPA35-33 primary filter. XPOWER also publishes a ductable outlet that can channel filtered air or support negative-pressure use.

That can make X-2580 a better fit when odor media matters, but it does not automatically make it a better fit for every restoration job. Carbon filters add a consumable stage and can be unnecessary when the task is primarily particulate control.

X-3400A vs X-3580: 600 CFM with different control and filter strategies

The larger normalized pair both publish 600 CFM and 2.8A in a 19.6 × 12.3 × 21.6 inch footprint. X-3400A weighs 28.8 lb and uses variable-speed control, three-stage filtration and built-in GFCI power outlets for daisy chaining. X-3580 weighs 32.8 lb and uses five-speed four-stage filtration with included CF35 carbon media.

This is another case where the maximum-CFM number cannot choose the machine: both are 600 CFM. The meaningful decision is variable speed and onboard outlets versus included carbon filtration and the slightly heavier four-stage package.

Exact filter part numbers matter across the XPOWER line

The similar model names do not imply filter interchangeability. The compact 13-inch filter platform and the larger 16-inch platform use different media sizes and part numbers.

HEPA performance is now verified for X-3580 as well

The current X-3580 manufacturer page explicitly publishes 99.97% filtration at 0.3 microns for its HEPA stage. That value is now stored in the normalized record rather than left blank, keeping the page, Compare tool and exact dataset aligned.

Negative-air support should be checked model by model

X-2480A and X-2580 have current normalized evidence supporting negative-air use. X-3400A and X-3580 have duct-size information, but Restoration Select does not automatically convert “ductable” into a verified negative-air flag unless the exact source supports that use clearly enough.

If containment and pressure control are the actual decision, use Negative Air Machine and the Air Scrubber Finder rather than assuming every XPOWER scrubber is equivalent.

Four units at 2.8A is 11.2A before other equipment

Because every normalized XPOWER scrubber in this group uses a 2.8A planning value, four units sum to 11.2A. That is useful arithmetic, but it does not determine whether those units should share one circuit. Add dehumidifiers and air movers in the Restoration Equipment Power Calculator when planning a mixed restoration setup.

Use the Finder when XPOWER is only one option

If the requirement is really “around 550–600 CFM,” “carbon filtration,” “lower weight,” “variable speed” or “daisy-chain outlet,” use the Air Scrubber Finder. It can compare these XPOWER models with Dri-Eaz, AlorAir, Phoenix and eligible BlueDri records without giving the brand extra points.

Current shopping paths

Restoration Select currently has approved search-style Amazon routes for the XPOWER air-scrubber category and exact X-2480A, X-2580 and X-3580 identities. X-3400A remains fully eligible editorially even though no exact Amazon route is active.

Primary references for this page

• XPOWER X-2480A ↗Current manufacturer source for 550 CFM, 2.8A, 23.6 lb, filter parts and daisy-chain outlets.
• XPOWER X-2580 ↗Current manufacturer source for 550 CFM, 2.8A, carbon/HEPA filter stages, weight, ducting and stackability.
• XPOWER X-3400A ↗Current manufacturer source for 600 CFM, 2.8A, variable speed, GFCI daisy-chain outlets and exact filter parts.
• XPOWER X-3580 ↗Current manufacturer source for 600 CFM, 2.8A, four-stage carbon/HEPA filtration, 32.8 lb and HEPA efficiency.
• XPOWER current air-scrubber catalog ↗Current manufacturer category page showing that XPOWER's live lineup extends beyond the four models normalized by Restoration Select.